X-P MX
Ultimate
Ultimate-performance collated nails for fastening to concrete and other base materials using powder-actuated tools
- Base materials: Concrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanized zinc coated <20 µm
From
TWD 374
X-P P8
Ultimate
Ultimate-performance single nail for fastening to concrete and other base materials using powder-actuated tools
- Base materials: Concrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)
- Minimum thickness of base material (concrete): 80 mm
- Minimum thickness of base material (steel): 6 mm
From
TWD 374
X-U MX
Ultimate
Ultimate-performance collated nails for fastening to concrete and steel using powder-actuated tools
- Minimum thickness of base material (concrete): 80 mm
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Galvanized zinc coated <20 µm
From
TWD 365
X-U 15 / 20 MXSP
Ultimate
Ultimate-performance collated nails for fastening to steel using powder-actuated tools
- Base materials: Steel
- Minimum thickness of base material (concrete): 80 mm
- Minimum thickness of base material (steel): 6 mm
TWD 378
X-U P8
Ultimate
Ultimate-performance single nail for fastening to concrete and steel using powder-actuated tools
- Base materials: Steel
- Minimum thickness of base material (concrete): 80 mm
- Minimum thickness of base material (steel): 6 mm
From
TWD 365
X-C MX
Premium
Premium collated nails for fastening to concrete using powder-actuated tools
- Base materials: Concrete (soft), Concrete, Masonry (solid limestone brick), Concrete soft, Soft- to medium reinforced concrete
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanized zinc coated <20 µm
From
TWD 150
X-C P8
Premium
Premium single nail for fastening to concrete using powder-actuated tools
- Base materials: Concrete (soft), Masonry (solid limestone brick), Concrete
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanized zinc coated <20 µm
From
TWD 154
X-C P8S
Premium
Premium single nail with steel washer for fastening to concrete using powder-actuated tools
- Base materials: Concrete (soft), Concrete (tough)
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanized zinc coated <20 µm
TWD 546
X-C P8S
Premium
Premium single nail with steel washer for fastening to concrete using powder-actuated tools
- Base materials: Concrete, Concrete (soft), Masonry (solid limestone brick), Soft- to medium reinforced concrete, Concrete soft
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanized zinc coated <20 µm
From
TWD 255
X-CT MX
Premium
Collated formwork nail for use with powder actuated tools for temporary fixing to concrete
- Base materials: Concrete (soft), Concrete, Masonry (solid limestone brick)
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanized zinc coated <20 µm
From
TWD 6
X-CT DP8
Premium
Single formwork nail for use with powder actuated tools on concrete
- Base materials: Concrete (soft), Concrete, Masonry (solid limestone brick)
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanized zinc coated <20 µm
From
TWD 233
X-R P8
Ultimate
High-performance single nail for use with powder actuated tools on steel in corrosive environments
- Base materials: Steel
- Minimum thickness of base material (steel): 5 mm
- Corrosion protection: Stainless steel A4(316) or equivalent
TWD 4,778
X-CR P8
Ultimate
Single nail for use with powder actuated tools on steel and concrete in corrosive environments
- Minimum thickness of base material (steel): 5 mm
- Corrosion protection: Stainless steel A4(316) or equivalent
- Environmental Conditions: Dry indoor, Indoor with temporary condensation, Outdoor temporary applications, Outdoor with low pollution, Outdoor with moderate concentration of pollution
From
TWD 2,402
X-CR S12
Ultimate
Single nail for use with powder actuated tools on steel in corrosive environments
- Base materials: Steel
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Stainless steel A4(316) or equivalent
TWD 268
X-CR P8 S
Ultimate
Single nail with steel washer for use with powder actuated nailers on steel and concrete in corrosive environments
- Base materials: Concrete (soft), Concrete (tough), Steel
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Stainless steel A4(316) or equivalent
TWD 3,406
X-ENP HVB
Ultimate
Single nail for fastening shear connectors to steel structures with powder-actuated nailers
- Base materials: Steel
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Galvanized zinc coated <20 µm
TWD 2,570
NK ENK
Premium
Premium nail for light/medium-duty fastening to concrete or steel
- Minimum thickness of base material (steel): 4 mm
- Environmental Conditions: Dry indoor, Indoor with temporary condensation
- Material: Carbon steel
From
TWD 334
