Accessories for fasteners

Setting tools, testers and other accessories for installing and inspecting anchor fasteners

47 Products

Filter
HIT-SZ Injection accessories
Description
Accessories for injectable mortars, including piston plugs and extension hoses
No technical data available
Hose HIT-VL 11 (1m)
Description
Extension hose to be used together with the HIT-SZ piston plug for injectable hybrid/epoxy mortal
Plug Diameter
12 - 35 mm
Extension hose HIT-VL 16 (10m)
Description
Extension hose to be used together with the HIT-SZ piston plug for injectable hybrid/epoxy mortal
Plug Diameter
20 - 55 mm
Mixer HIT-RE-M
Description
Mixers and extensions for injectable mortars
No technical data available
Blow-out pump
Description
Injectable mortar accessories for blowing out
No technical data available
HVU2 Setting tool
Description
Setting tool for HAS-U anchor rods with HVU2 capsules
No technical data available
TE-C HEX, TE-Y HEX Setting tool
Description
Setting tool for capsule anchor rods with hexagon heads
No technical data available
HSV/HSA/HST/KB3/KB-TZ2 Setting tool
Description
Setting tool for driving compatible expansion anchors into concrete
No technical data available
TE-Y-HDA-ST Setting tool
Description
Setting tool – required for installation of HDA undercut anchors
No technical data available
Products in this group use a Hilti TE-Y type connection end (commonly called SDS-Max).
TE-C-HDA-RT Anchor removal tool
Description
Disassembly tool – for easy removal of HDA undercut anchors
No technical data available
Products in this group use a Hilti TE-C type connection end (commonly called SDS-Plus).
TE-C-HSC-MW Setting tool
Description
Setting tool for HSC shallow undercut anchors
No technical data available
Products in this group use a Hilti TE-C type connection end (commonly called SDS-Plus).
HKD-TE-CX Setting tool (long)
Description
Setting tool for long HKD anchors with an integrated SDS Plus (TE-C) stop hammer drill bit
Connection end
TE-C (SDS Plus)
Base material
Reinforced concrete, Concrete
Working mode
Hammer drilling
Products in this group use a Hilti TE-C type connection end (commonly called SDS-Plus).
TE-C-HDA-ST Setting tool
Description
Setting tool – required for installation of HDA undercut anchors
No technical data available
Products in this group use a Hilti TE-C type connection end (commonly called SDS-Plus).
TE-C-HDA-GT Undercut tool
Description
SDS Plus undercut tool for creating the undercut for HDA anchors where rebars are hit
Material, corrosion
N/A
Head configuration
N/A
Approvals / Test reports
N/A
Products in this group use a Hilti TE-C type connection end (commonly called SDS-Plus).
TE Setting adapter (HVU2)
Description
Setting adapter for capsule anchor rods with hexagon heads
No technical data available
2-in-1 HDI Short version
Description
Setting tool for HDI anchors with an integrated SDS Plus (TE-C) stop hammer drill bit
Connection end
TE-C (SDS Plus)
Base material
Reinforced concrete, Concrete
Working mode
Hammer drilling
Products in this group use a Hilti TE-C type connection end (commonly called SDS-Plus).
HSU ST-G Setting tool
Description
Setting tool – required for installation of HSU-R stone undercut anchors
No technical data available
Setting tool HHD-S
Description
Setting tool
No technical data available
Setting tool HSD-G M16 5/8"X65
Description
Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
Setting tool HSD-G M20 3/4"X80
Description
Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
Setting tool HSD-G 3/8"x20
Description
Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
Setting tool HSD-G M10 3/8"x30
Description
Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
Setting tool HSD-G M6 1/4"X25
Description
Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
Setting tool HSD-G M8 5/16"X30
Description
Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
Setting tool HSD-G M8 5/16"x40
Description
Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
Setting tool HSD-G M10 3/8"X40
Description
Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
Setting tool HSD-G M12 1/2"X50
Description
Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
Setting tool HSD-M M6 1/4"X25
Description
SDS-plus (TE-C) setting tool for drop-in anchors
No technical data available
Setting tool HSD-M M10 3/8"X30
Description
SDS-plus (TE-C) setting tool for drop-in anchors
No technical data available
Setting tool HSD-M M10 3/8"X40
Description
SDS-plus (TE-C) setting tool for drop-in anchors
No technical data available
Setting tool HSD-M M12 1/2"X50
Description
SDS-plus (TE-C) setting tool for drop-in anchors
No technical data available
HIT-CR-M Centering ring
Description
Plastic centering ring for rods and rebar
No technical data available
Torque tool X-BT 1/4" - 8Nm
Description
Accessories for X-BT-MF threaded studs, including sockets, T-handles and torque tools
Additional Accessory Information
Torque tool for tightening X-BT threaded studs
S-TB Torque bar


Description
Torque-controlled socket wrench for setting HSA anchors
Connection end
1/2 in square
Torque tool S-BT 1/4" - 5Nm
Description
5 Nm torque tool for installing S-BT threaded screw-in studs on aluminium or steel (thickness < 6 mm)
No technical data available
Check gauge D=8-10-14mm
Description
Check gauge for screw anchors reusability verification in temporary fixings (HUS4, HUS3, HUS2) to attach to SIW impact wrench
Material, corrosion
Carbon steel
Head configuration
N/A
PROFIS Software
No
Check gauge HUS 8-10-14mm cordl.
Description
Check gauge for screw anchors reusability verification in temporary fixings (HUS4, HUS3, HUS2) to attach to SIW impact wrench
Material, corrosion
Carbon steel
Head configuration
N/A
PROFIS Software
No
Check gauge HUS 12-16mm cordl.
Description
Check gauge for screw anchors reusability verification in temporary fixings (HUS4, HUS3, HUS2) to attach to SIW impact wrench
Material, corrosion
Carbon steel
Head configuration
N/A
PROFIS Software
No
Plastic box HIT PROMO insulated
Description
Protective storage and transport container for HIT injection mortars
No technical data available
Plastic box assy HIT insulated
Description
Protective storage and transport container for HIT injection mortars
No technical data available
Plastic box HIT lid
Description
Protective storage and transport container for HIT injection mortars
No technical data available
Plastic box HIT bottom
Description
Protective storage and transport container for HIT injection mortars
No technical data available
Pumps


Description
Bulb Pumps
No technical data available
Torque tool X-BT 1/4" 20Nm / 14.8lbft
Description
Torque tool for use with new-generation X-BT threaded studs
No technical data available
HIT-CB Collar bush
Description
Plastic collar bushing for rods and rebar
Material, corrosion
Plastic
PROFIS Software
No

New

Torque tool S-BT 1/4" - 16Nm
Description
16 Nm torque tool for installing S-BT threaded screw-in studs on steel (thickness < 6 mm)
No technical data available
HIT-RB Brushing and guiding accessories
Description
Injectable mortar accessories for brushing and guiding
No technical data available